Gas, heat pump & electric pool heater repair — same-day diagnosis on most calls. Service call $149, deducted from the repair cost if you proceed. 1-year warranty on every repair.
Heater showing an error code? Text us a photo of the display and the data plate to 682-399-2593 and we'll tell you what's wrong and what it costs — usually in minutes. No obligation, no pressure.
Nine out of ten heater calls in DFW start with one of these. If yours matches, call — we fix all of them every week.
Usually a pressure switch, flame sensor, or ignitor — parts we stock on the truck.
FLO, HL, ECO, CE — we decode every major brand's error codes on the spot.
Ignitor or gas valve issue — both are same-day fixes in most cases.
Heat exchanger corrosion — we'll give you an honest repair-vs-replace answer.
Scale buildup or restricted flow — hard on the exchanger if you let it go.
Refrigerant, compressor, or defrost board — we service heat pumps, not just gas.
Thermostat, sensor, or bypass valve — we find it fast.
Combustion problem. Shut the heater off and call — this one's a safety issue.
Gas, heat pump and electric pool heaters — all major brands: Pentair MasterTemp, Raypak, Jandy JXi, Hayward Universal, AquaCal, Pentair UltraTemp, Rheem.
Not sure which one you have or which you should get? Here's the short version.
Heats fast, in any weather — the choice for spas and quick weekend heat-ups. Higher gas cost per degree, and in Texas the burners and exchangers work hard all season.
Most gas heater repairs we see: ignitor and pressure-switch failures, exchanger corrosion, and control board faults.
Cheapest heat per degree — it moves warmth from the air into your water. Slower than gas, and it struggles below about 50°F, but it's the low-cost choice for long swim seasons.
Most heat pump repairs we see: capacitors, contactors, defrost boards, refrigerant leaks, and fan motors.
Under about 10 years old, repair — most heater failures come down to a single component, and fixing it usually costs a fraction of replacement.
Over 10 years with a cracked heat exchanger or a major control failure, replacement (typically $3,500-5,000 installed) usually wins — we'd rather lose the job than sell you a repair that doesn't make sense.
Learn more: Gas vs heat pump for Texas pools → · New DOE heater efficiency rules →
From call to warm water in as little as one visit. Here's exactly what to expect.
Call us or text a photo of the heater's error code. We'll tell you what it means on the spot.
$149 service call covers the trip and full diagnosis — deducted from the repair cost if you proceed.
We stock ignitors, pressure switches, flame sensors and boards for popular Pentair, Raypak, Jandy and Hayward models — many repairs happen same-day.
Every repair is backed by our 1-year warranty. If the same issue returns, we fix it free.
Every repair includes a 1-year warranty. We quote you the full price before any work starts — no surprises.
| Repair Type | Typical Cost | Warranty |
|---|---|---|
| Service call (diagnosis) | $149 | — |
| Ignitor, flame sensor or pressure switch | $249-450 | 1 year |
| Gas valve or control board | $400-800 | 1 year |
| Heat exchanger repair/replacement | $1,200-1,500 | 1 year |
| Heat pump refrigerant/compressor work | $350-1,500 | 1 year |
| Full heater replacement (installed) | $3,500-5,000 | 1 year |
Service call $149 — deducted from the repair cost if you proceed with the repair. Same-day service available for common heater repairs.
Includes diagnosis and repair quote. Deducted from the repair cost if you proceed.
Local Arlington company. We know your neighborhood and we're minutes away.
We also repair pool heaters in these DFW-area cities:
Straight answers from a company that repairs pool heaters every week in Arlington.
The $149 service call covers the trip and full diagnosis, and it's deducted from the repair cost if you proceed with the repair. Common repairs — ignitors, pressure switches, gas valves, control boards — typically run $249-1,500. Full heater replacement runs $3,500-5,000 installed. We quote the full price before any work starts.
Same-day for the most common failures — we stock ignitors, flame sensors, pressure switches and control boards for popular Pentair, Raypak, Jandy and Hayward models. If a part has to be ordered, typical turnaround is 1-3 days.
Under about 10 years old, repair — most heater failures come down to a single component. Over 10 years with a cracked heat exchanger or a major control failure, replacement usually makes more sense. We'll give you an honest answer, even when it's the cheaper one.
Almost always low water flow or a failed pressure switch — the heater shuts itself down to protect the exchanger. We check the pump, filter and switch together, because the "heater problem" is often really a flow problem.
Yes — compressors, refrigerant leaks, defrost boards, capacitors and fan motors on heat pumps; elements, contactors and flow switches on electric heaters. All major brands, same $149 service call and 1-year warranty.
It covers the trip and a complete diagnosis of your heater, and it's deducted from the repair cost if you proceed with the repair. If you decide not to repair, the $149 is due.
Water's cooling off and every week your heater sits broken is a week you can't swim. Call now — same-day diagnosis on most calls, 1-year warranty on every repair.